Transcan Solo Kurzanleitung Seite 2

1 Power supply
The power socket is located on the base of the recorder enclosure.
Insert the power plug into the power socket and fasten the screws.
The input voltage range is 10-36V dc.
2 Temperature Probe and On/Off Input connections
The sockets for the temperature probes and on/off status inputs are
located on the base of the recorder enclosure. The sockets for
temperature inputs 1 and 2 are marked T1 and T2, respectively.
The socket for the door status input is marked S1 while the user
definable (spare) input is marked S2. To connect a probe or input,
insert the plug into the respective socket. It is fixed securely when
an audible 'click' is heard.
1 UDN 1893 E