Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. BASIC
OPERATION
I. Use the DP cable to connect your monitor and your computer's graphics card.
2. If your graphics card doesn't offer DP,you can use the HDMI cable instead.
DP connector
3. Connect the power cable to your monitor and to an outlet. In case you can't
reach a wall outlet directly, we recommend to use a surge protector with
adequate voltage.
4. Pressthe power button of the monitor to turn it on.
FreeSync
The FreeSync feature is off by default. Your graphics card must be able to
support it and have the latest drivers installed. After connecting, you may
receive a prompt to enable the feature in your graphics card software menu.
Otherwise please check the graphics card manual on how to enable FreeSync.
9. INDICATOR
Consistent blue light indicates that the monitor is turned on and operating
normally. Flashing blue light indicates that no video source (horizontal or vertical
signal) has been detected. Please make sure that your computer is turned on and
that the DP or HDMI cable is correctly connected (fully inserted into the port).
HDMI
connectors
LIGHT
ENG-9
o
Indicator light
Werbung
