VEVOR AE988D Bedienungsanleitung Seite 6

5. Temperature adjustment
Temperature range
AE988D: 50-500℃ (122-932℉)
Temperature adjusted by knob.
6. Screen brightness setting
1) Press and hold the function key till the the screen displays , to enter the
brightness setting.
2) Show the current digital display brightness level - .
3) Adjust the brightness level through the knob: gear 1-6.
4) Press the function key or wait for 10s to automatically save to complete the
setting.
7. Standby and sleep functions
Standby function on and off:
1) Press and hold the function key till display on LED segment to enter the
standby function on/off setting:
2) Display the current setting or
3) Adjust by knob: or to turn on/off the standby and sleep function.
4) Press the function key or wait for 10s to automatically save to complete the
setting.
Standby function
1) When standby function is turned on, the soldering station will enter standby
mode after not in use for 10 minutes.
2) In standby mode, LED segment displays and temperature drops to 250℃
(482 ℉).
3) When any operation is detected, such as using the soldering iron, adjusting
knob or pressing the function key, it will return to the work mode.
4) When in standby mode, if no further operation is detected for 10 minutes, it will
enter sleep mode.
Sleep function:
1) That short press the function key or longtime in standby mode can make it enter
sleep mode.
2) When entering sleep mode, screen displays and heating is turn off.
- 5 -