Safety Instructions; Battery Selection - Rebel Power Rb-4001 Bedienungsanleitung

Before use, read this instruction manual carefully and keep it for future reference.
Producer does not claim responsibility for damages caused by inappropriate handling
and use of the product.

SAFETY INSTRUCTIONS

• Rebel Power PROsinus emergency power supply is designed for household and
office use. Do not use this device with specialized equipment or apparatuses (e.g.
industrial, medial equipment).
• Do not overload device. Operating this device with load higher than nominal may
lead to damaging this device.
• Note: Device may work on overload for a short period of time.
• Do not disassemble this device nor open the housing. High voltage might be still
present on the inside elements of the device, even after it has been switched off.
• Do not use this device if it is not working properly. In such case, turn the device off
immediately, disconnect it from power supply and from external battery.
• Any repair can be carried out in an authorized service point exclusively.
• In case of fire, use only dry powder extinguisher. Using water or other types of fire
extinguishers can lead to electrocution.
• Position the device vertically, in a properly ventilated place with suitable temperature.
Warning: do NOT cover cooling fan of the device; it may lead to overheat.
• Protect this device from water, humidity as well as sources of heat and direct sunlight.
• Before use, make sure the device is properly grounded.

BATTERY SELECTION

For optimum operation quality, use this device with gel or certain acid batteries (acid
EN
batteries which reach 14,5 V during charging), with maximum capacity of 100 Ah.
Producer suggests VIPOW rechargeable batteries.
For optimum battery selection, refer to estimate formula below:
100 W of load = → 10 A current consumption for the battery
Example: with 150 W load and 100 Ah battery, estimated operation time is around 100
Ah/15 A≈ (around) 6,5 h.
Safety instructions concerning battery
• Do not dispose the battery in fire (battery may explode).
• Do not disassemble / destroy battery (electrolyte inside the battery is harmful for
skin and eyes).
16
Owner's manual Owner's manual
• While connecting and operating this device, pay attention not to cause short circuit—
it may lead to electrocution.
• Take off all metal object from your hands (hand watches, rings, etc.) before use of
the product.
• Use only tools with insulated handle.
• Power supply socket should be easily accessible and located near the appliance.
• Warning: Inappropriate use of the device may lead to fire or electrocution.
• Do not dispose old batteries together with other household wastes.
FUNCTIONS
Function Buttons
1 Emergency power • Power supply mains switch
supply device with ON („1")
charging function • Inverter power switch ON
2 Rectifier • Power supply mains switch
ON („1")
• Inverter power switch OFF
3 Inverter • Power supply mains switch
OFF („0")
• Inverter power switch ON
FEATURES
• Rebel Power inverter with pure sine wave serves as an emergency power supply
device for equipments such as: central heating furnace, TV, refrigerator, induction
stove, electric fans, etc.
• Wide range of input voltage, high degree of output voltage accuracy, automatic
voltage regulation.
• Build in protection from overload, short circuit, overvoltage, undervoltage, overheat.
• LED display with current state indicators.
Description
Processing direct current (12
VDC) from external battery
into alternating current (230
VAC), and external battery
charging
External battery charging.
Note: device has to be
connected to power supply
mains 230 VAC
Processing direct current (12
VDC) from external battery
into alternating current (230
VAC)
EN
17