Led Display; Indicator Function Declaration - Takara Le Fute Rf10 Bedienungsanleitung

Function Declaration
NO. Function Declaration
When switching the switch to "ON" position, the safe early=warning system is started, and the LED
1
enters self-checking condition.
Start information：Sign of information display is "XX".
2
Version display：It is the following versions respectively:
It displays program version number (A+ three digits of version number) for the first time. It display as
3
the following picture.
It displays data version number for the second time. (Four digits of version number)
Time display：After the GPS receiving the satellite signal, it displays local time when the vehicle is
stopped. (the picture shows the time is 7：59）.
4
After GPS is positioned, it will display GPS time, and the time will not be lost after the product is
turned off.
GPS positioning state display: After GPS is positioned, "： "in the middle of displayed time will flicker,
5
or it will be normal on.
Speed display: After GPS is positioned, it displays the speed of the vehicle when the vehicle is driving
6
(the speed is over 12 km/h). (The picture shoes the speed is 79KM/H).
Direction display: After GPS is positioned; it displays the driving direction when the vehicle is
7
driving. (The picture shows the direction is to northwest.).
Voice prompt and distance display: When alarming target (POI point) is discovered, the product will
8
send out voice prompt, and display the left distance of the vehicle to the alarming target. (The picture
shows the distance is 990M).
RF10 User Manual
25

LED Display