Key Parts; Symbols In Manual - Kyocera Tjep Rc20A Sicherheits- Und Bedienungsanleitung

Key parts

See drawing on page 5
1: Blade spindle lock button
4: Tool LED
7: Cutting slot opening
10: Switch (ON/OFF)
Battery:
B1: Battery terminals
Charger:
C1: Charger terminals
The safety alert symbol indicates a potential hazard to personal injury.
DANGER: Indicates a hazard which, if not avoided, will result in death or serious injury.
Read and understand tool labels and manual. Failure to follow warnings could result in serious
injury.
Operators and others in work area shall wear impact-resistant eye protection with side shields and
CE-marked head protection.
Operators and others in work area shall wear hearing protection.
Keep hands and body away from the cutting area of the tool.
Symbols on tool
This tool is CE-approved according to
applicable standards.
Read and understand tool labels and
manual. Failure to follow warnings
could result in serious injury.
Operators and others in work area shall
wear impact-resistant eye protection
with side shields and CE-marked head
protection.
Dispose product according to the
WEEE directive.
2: Handle
5: Removable side handle
8: Blade cover
B2: Release Button
C2: LED

Symbols in manual

21,6V
Øxx - xx
mm
Øxxx mm
3: Lithium-Ion 24V battery
6: Chip exhaust area
9: Battery LED
B3: LED
C3: Vents
It is recommended that operator and
others in work area wear CE-marked
gloves and non-skid safety shoes.
Operating voltage
Minimum and maximum workpiece
range.
Diameter of blade
English
7