Sehr geehrter Kunde, Sie haben sich für ein Produkt aus dem Hause KS Tools entschieden. Wir danken Ihnen für Ihr Vertrauen. In dieser Anleitung finden Sie alle für den sicheren und sachgemäßen Gebrauch notwendigen Informationen. Lesen Sie daher die Anleitung vor dem Gebrauch vollständig durch und halten Sie sich stets an die darin enthaltenen Hinweise. Diese Anleitung ist Teil des Produkts und ist daher so aufzubewahren, dass sie unbeschädigt erhalten bleibt.
Während des Einziehens / Herausziehens des Kabels. Wenn das Kabel verriegelt ist, ziehen Sie es erneut heraus und wiederholen Sie die Arbeit. Technische Daten Gehäusematerial Kabellänge 15 + 1 m 150.4217/4317: H07RN-F 3Gx1,5 mm² Kabeltyp 150.4218/4318: H07RN-F 3Gx2,5 mm² Spannung 230 V 150.4217/4317: 1000 W - 3000 W Leistung 150.4218/4318: 1500 W - 3500 W...
Dear customer, KS Tools thanks you for your trust and for buying one of its products. In this manual, you will find every safety warnings and precautions, operating, maintenance and cleaning procedures. Please, read it carefully before using the product. Keep this manual and invoice in a safe and dry place for future reference.
2. It is suggested to mount the reel approximately 1 meter above the ground. OPERATION Connect the leader cable to the power supply, Unwind - Pull out cable to desired length and stop after “KAKA” sound is heard. Roll up the hose - Release the lock by one more pull and let the hose back.
Seite 6
Cher client, La société KS Tools vous remercie pour la confiance que vous lui avez accordée en achetant ce produit. Vous trouverez dans ce guide toutes les informations nécessaires à la sécurité et la bonne utilisation du produit. Merci de bien vouloir en prendre connaissance et lire les instructions avant toute utilisation.
REMARQUE 1. L'enrouleur doit être installé contre un mur, un poteau ou un plafond 2. Il est conseillé de monter l’enrouleur à environ 1 mètre du sol. OPERATION Raccorder le tuyau à la source d’alimentation. Dérouler le tuyau Tirer le câble à la longueur souhaitée. S’arrêter après avoir entendu un son de type « Clac ». Enrouler le tuyau - Relâcher le câble en tirant une nouvelle fois et laissez le câble s’enrouler.