Remote Control - Eternico Aet-Rlr11 Bedienungsanleitung

OVERVIEW
Remote control
1 Brightness dimming button
Press briefly to lower the brightness of the
light by 10
light intensity continuously.
2 up button
PressBriefly to increase the brightness of the
light by 10 press and hold to adjust the
light intensity cont'nuou
3 RGB light color s
to 1 5 colors)
4 OFF button
LED light off
The remote control is supplied Witha 3Vbattery type CR2025. For protection during transport
and premature discharge, the battery is provided with a protective foil. Before using the re
mote control, remove the protective foil by pulling it out of the battery companment,
10 ENGLISH
and hold to adjust the
n b (up
5 ON button
LEDlight on
6 White light
(cold "hitc • natural white • warm Wh.te)
7 MODE button
A Shon press will switch between the differ-
ent light modes (skip color mode or flashing
t be locked).
Speed setting in color flash mode: there are a
total of 3 speeds to choose from.
selection b