adapter is damaged. Do
not try to repair it yourself.
Contact Customer Support
(see page 13).
WARNING: To reduce the risk
•
of fire or electric shock, do
not use this fan with any solid-
state speed controls (such as
a dimmer switch).
Not for commercial or
•
industrial use. Household use
only.
Ensure that the fan is switched
•
off from the supply mains
before removing the guard.
Do not operate any fan with
•
a damaged cord or plug.
Discard fan or return to an
authorized service facility for
examination and/or repair.
Do not run cord under
•
carpeting. Do not cover cord
with throw rugs, runners, or
similar coverings. Arrange
cord away from traffic area
and where it will not be
tripped over.
This fan can be used by
•
children 8 years and older
as well as persons with
reduced physical, sensory, or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the fan in a
safe way and understand the
hazards involved.
Power Adapter
This device is only to be used
•
with the power supply unit
provided with the device.
Turn off the fan before
•
removing the adapter from
the outlet. To unplug, grab
the adapter and pull from the
outlet. Never pull from the
power cord.
Keep the fan near the outlet
•
it is plugged into. The use
of an extension cord is not
recommended.
Always turn the fan off and
•
unplug it when not in use and
before moving, cleaning, or
servicing the fan.
Turn off and unplug the adapter
•
when not in use for extended
periods of time.
Never place the cord near any
•
heat source.
Do not cover the cord with a
•
rug, carpet, or other covering.
Do not place the cord under
furniture or appliances.
To avoid a tripping hazard, keep
•
the cord out of areas where
people walk often. Place the
cord where it will not be tripped
over and safely coil the cord.
A loose fit between the
•
outlet and plug may cause
overheating and a distortion of
the adapter. Contact a qualified
electrician to replace a loose or
worn outlet.
EN
3