SUNLU FilaDryer S4 Benutzerhandbuch Seite 3

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please visit our customer support page: www.alza.cz/EN/kontakt.
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Caution
Do not place the product where children can reach.
•
Pay attention to electrical safety during operation. Do not use this product near
•
water, such as in the bathroom, bathtub, wash basin and other places where
water is easily accessible.
Only use the original power adapter or a fully certified 24V/2A power adapter.
•
Switch off the power supply when not using this product to avoid sudden fire.
•
Place the two rollers in the box before operating the dryer.
•
When drying filament, do not place the products on temperature sensitive
•
objects.
Do not touch the heaters in the over when drying filament to avoid burns.
•
The upper lid of the drying oven should be covered when drying consumables to
•
avoid heat loss.
In order to ensure the drying effect, do not open the drying box at will during
•
operation.
If there is a fault with the product, disconnect the power adapter from the
•
filament dryer and the electrical socket then contact the after-sales support
team.
3