Samsung EP-PN920 Handbuch Seite 211

Using the wireless charger
3
When the mobile device is fully charged, remove it from the wireless charger.
Do not place foreign materials, such as metal objects, magnets, and magnetic stripe
cards, between the mobile device and the wireless charger. The mobile device may
not charge properly or may be damaged due to overheating.
• Y ou may need to purchase a charger separately depending on the wireless charger
you bought.
• W hen the mobile device is not placed on the charging surface properly, or
depending on the location of the mobile device's wireless charging coil, your
mobile device may not charge properly.
• D epending on the location of the mobile device's wireless charging coil, your
mobile device may not charge properly.
• W ireless charging may not work properly if you have attached a thick case to your
mobile device. If your case is thick, remove it before placing your mobile device on
the wireless charger.
• I f you use the wireless charger in areas with weak network signals, you may lose
network reception.
• I f you connect a charger to the mobile device during wireless charging, the
wireless charging feature will be unavailable.
• T he wireless charger is compatible with WPC certified devices.
• T o save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
Fast wireless charging
The wireless charger supports fast wireless charging. To begin fast wireless charging, place a
mobile device that supports fast wireless charging on the wireless charger.
Use only Samsung-approved chargers that support fast charging (EP-TA20 series
9 V/1.67 A).
The fan inside the wireless charger operates during fast wireless charging. The fan will
not operate when this feature is deactivated on your mobile device.
English (USA)
7
5