Assembly; Preparation; Required Tools; Assembling The Electric Smoker - tepro GREENDALE 4031 Bedienungsanleitung

t

Assembly

Preparation

Danger Risk of injury!
Failure to follow these instructions can lead to
problems and risks while using the electric smoker.
– Follow all of the assembly instructions listed here.
1. First read through the assembly instructions completely.
2. Take sufficient time to carry out the assembly and use an
even working surface of three to four square metres.
3. Small parts such as handles will probably be preassembled.
4. Two people are needed for the mounting.

Required tools

1 x Phillips screwdriver
1 x Adjustable spanner

Assembling the electric smoker

Unpack the electric smoker and remove all packaging films. Store
packaging materials out of the reach of children and dispose of
them after the assembly in accordance with the regulations.
Assembly
1. Lift the door (13) to unhinge it.
16
P160174_TEPRO_4031_Greendale_eSmoker.indb 16
2. Fasten the side handles (14) with M6x12 screws at the left
and right of the smoking chamber (1).
3. Turn the smoker upside down with the aid of the second
person and fasten the support legs (16) under the smoking
chamber (1) using M6x12 screws.
7/11/16 4:33 PM