Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice
in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 06/2025
Declaration of conformity
Products with a CE symbol fulfill the EMC directive (2014/30/EU) and
RoHS directive (2011/65/EU+2015/863+2017/2102), which were released by the
EU-comission.
The declaration of conformity can be downloaded under documents:
https://www.delock.de/produkte/G_64173/merkmale.html
WEEE-notice
The WEEE (Waste Electrical and Electronic Equipment)-directive, which became
effective as European law on February 13th 2003, resulted in an all out change
in the disposal of disused electro devices. The primarily purpose of this directive
is the avoidance of electrical waste (WEEE) and at the same time the support of
recycling and other forms of recycling in order to reduce waste. The WEEE-logo
on the device and the package indicates that the device should not be disposed
in the normal household garbage. You are responsible for taking the disused
electrical and electronical devices to a respective collecting point. A separated
collection and reasonable recycling of your electrical waste helps handling the
natural resources more economical. Furthermore recycling of electrical waste is
a contribution to keep the environment and thus also the health of men. Further
information about disposal of electrical and electronical waste, recycling and
the collection points are available in local organizations, waste management
enterprises, in specialized trade and the producer of the device.
EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany
Hrvatski
Preduvjeti sustava
• Slobodno SFF-8643 sučelje
Sadržaj pakiranja
• Pretvarač
• Korisnički priručnik
Sigurnosne upute
• Zaštitite proizvod od vlage
• Zaštitite proizvod od izravne sunčeve svjetlosti
• Ne zaboravite da HDD može biti vruć kada je spojen na uređaj.
Instalacija
1.
Spojite pretvarač pomoću dodatnog SFF-8643 kabela na slobodno SFF-8643
sučelje sustava.
2.
4-polni konektor napajanja se mora spojiti na odgovarajući izvor napajanja.
3.
Sada možete umetnuti karticu PCI Express u utor PCI Express.
ελληνικά
Απαιτήσεις συστήματος
• Μια ελεύθερη διασύνδεση SFF-8643
Περιεχόμενα συσκευασίας
• Μετατροπέας
• Εγχειρίδιο χρήστη
Οδηγίες ασφάλειας
• Προστατεύστε το προϊόν από την υγρασία
• Προστατεύστε το προϊόν από την άμεση ηλιακή ακτινοβολία
• Προσέχετε καθώς η HDD μπορεί να καίει όταν είναι συνδεδεμένη με τη συσκευή.
Εγκατάσταση
1.
Συνδέστε τον μετατροπέα μέσω του προαιρετικού καλωδίου SFF-8643 σε μια
ελεύθερη διεπαφή SFF-8643 του συστήματός σας.
2.
Ο σύνδεσμος τροφοδοσίας 4 ακίδων πρέπει να είναι συνδεδεμένος στην
κατάλληλη παροχή ρεύματος.
3.
Τώρα μπορείτε να εισάγετε μια κάρτα PCI Express σε μια υποδοχή PCI
Express.
User manual
Mode d'emploi
Uživatelská příručka
Manuale utente
Manual de utilizare
Korisnički priručnik
SFF-8643 to PCI Express x16 Converter
English
System requirements
• A free SFF-8643 interface
Package content
• Converter
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Pay attention that the HDD can be hot when it is connected to the device.
Installation
1.
Connect the converter via optional SFF-8643 cable to a free SFF-8643
interface of your system.
2.
The 4 pin power connector must be connected to an appropriate power
supply.
3.
Now you can insert a PCI Express card into the PCI Express slot.
Deutsch
Systemvoraussetzungen
• Eine freie SFF-8643 Schnittstelle
Packungsinhalt
• Konverter
• Bedienungsanleitung
Sicherheitshinweise
• Produkt vor Feuchtigkeit schützen
• Produkt vor direkter Sonneneinstrahlung schützen
• Achten Sie darauf, dass die Festplatte am Gerät sehr heiß sein könnte.
Installation
1.
Schließen Sie den Konverter via optionalem SFF-8643 Kabel an eine freie
SFF-8643 Schnittstelle Ihres Systems.
2.
Den 4 Pin Stromanschluss müssen Sie mit einem entsprechendem Netzteil
verbinden.
3.
An dem PCI Express Anschluss können Sie nun eine PCI Express Karte
einsetzen.
Bedienungsanleitung
Manual del usuario
Instrukcja obsługi
Bruksanvisning
Használati utasítás
Εγχειρίδιο χρήστη
Product-No: 64173
User manual no: 64173-a
www.delock.com