RICOKIDS RC-829 Bedienungsanleitung

EN
Dollhouse with furniture
82 x 33 x 118 cm
Instructions manual
Warnings!
• Please read these instructions before use and keep them for future
reference.
• Assembly must only be carried out by an adult in accordance with these
instructions.
• Keep children away when assembling and disassembling the product to
prevent injury.
• The product contains small parts that are potentially dangerous in an
unassembled state. Keep unassembled parts away from children.
• It is recommended to use this toy under adult supervision.
• Product suitable for children over 36 months of age.
• Risk of suffocation with plastic bags! Packaging may be dangerous for
children.
• When not in use, the toy must be kept out of the reach of children.
• Before using, remove and eliminate any plastic bags and any parts that are
not part of the toy (for example, cords, fasteners, etc.) and keep them out of
the reach of children.
• Improper use of the toy can be dangerous for the child.
• Overturning the toy or dropping parts of the toy poses a risk of injury or
damage. To minimise this risk, the use of fixed accessories is recommended.
• The condition of the product should be checked regularly to ensure that all
components are fitted correctly. If inspections are not carried out every time,
the toy may endanger the child.
• Do not use if toy components are damaged or missing.
• A child should only use the toy on surfaces that are flat, stable and free of
obstacles (such as carpets, doormats, protrusions). Toy for indoor use.
• Do not use the toy on the street, entryways or sloping surfaces; ensure that
the toy is used in an area free of obstacles and away from potentially
dangerous areas (such as pools, canals, lakes, stairs, etc.).
• Caution: keep the product away from fire.
Cleaning and maintenance
• Ne wash with a rough sponge, do not use chemicals or solvents.
• Check the condition of the product regularly and tighten loose screws.
• Protect the product from sunlight and moisture.
• After assembling the product, dispose of its packaging.
Assembly
• Unpack all components from the packaging.
• Assembly must only be carried out by an adult.
• Follow the instructions shown on the following pages.
• When assembling, do not tighten all screws firmly, as this may cause
problems in fitting subsequent components. Tighten all screws after
assembly is complete.
Wyprodukowano w Chinach dla: / Made in China for: / Hergestellt in China für:
Global Income sp. z o.o., ul.Chwaszczyńska 135B, 81-571 Gdynia, Poland
INFORMATION FOR USERS ON HOW TO HANDLE WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT.
If the appliance, packaging, operating instructions and the like are marked with the symbol of a crossed-out wheeled bin, this means that the appliance is subject
to separate waste collection in accordance with Directive 2012/19/EU of the European Parliament and of the Council. The used appliance should not be disposed
of with other household waste and should not be treated as municipal waste. By throwing your electro-waste into a container you pose a risk to the environment.
Take your used appliance to a separate collection point for electrical and electronic equipment organised by the public administration. By separating and
submitting used electrical and electronic equipment for treatment, recovery, recycling and disposal, you protect the environment from pollution and contamina-
tion, contribute to reducing the use of natural resources and lower the cost of manufacturing new equipment. Proper disposal and scrapping helps to eliminate
the negative impact of discarded products on the environment and human health.
For details on how this product can be recycled, please contact your local municipality, city cleaning service or the shop where you purchased the product.
Product complies with EU standards EN71-1, EN71-2, EN71-3.
LED light module
Warnings - lighting!
• Lighting module with non-replaceable light source (LEDs).
• Do not allow any electrical parts to get wet.
• Do not cover the lighting module during operation.
• If the insulation of the cable, housing or light source is damaged, the
module is not suitable for further operation. Do not replace the cable
yourself, repair the product or open its housing. In the event of damage, the
module must be removed from the toy and disposed of.
• Performing any work inside the module while the power is on risks electric
shock!
• Do not use the module in a place where unfavourable environmental
conditions prevail, e.g. dust, dirt, water, moisture, vibrations, etc.
• The module may become hot during operation, risk of burns.
• Do not stare into the light beam, risk of eye damage!
• Failure to follow these instructions may lead, for example, to fire, burns,
electric shock, physical injury and other material and immaterial damage.
The manufacturer accepts no liability for damage resulting from non-com-
pliance with these instructions.
• The battery module should only be cleaned with a dry cloth by first
switching off the power supply and removing the batteries.
Warnings - batteries!
• Use only the recommended alkaline batteries of the type and quantity
indicated on the rating label which is located on the product.
• Batteries can be hazardous in exceptional situations! Risk of leakage, fire
and ignition! Caution must be exercised.
• Do not combine new and used batteries, batteries of different types,
batteries with rechargeable batteries.
• Insert batteries according to the correct +/- battery polarity.
• Remove batteries if the product will not be used for a long period of time.
• If you use rechargeable batteries, remove them from the product before
charging.
• Dispose of used batteries as recommended at the end of this manual.
• Do not charge disposable batteries.
• Rechargeable batteries should only be charged by an adult.
• Remove exhausted batteries from the product.
• Keep batteries out of the reach of a child.
• A battery that is leaking electrolyte fluid must not be used or charged.
• Remove leaking, leaking batteries immediately as they may cause skin
burns or other injuries.
• Do not short-circuit the battery compartments or terminals.
RC-829
2 x CR1632 3V