INSTRUCTIONS
Battery insertion/replacement
The battery to power the device is not included and must be inserted by the user. Remove
the battery compartment cover and insert a new AAA battery. Observe correct polarity when
inserting a battery. Replace the cover.
If the battery is dead, first remove the battery compartment cover. Remove the battery and
insert a new AAA battery into the compartment. Observe correct polarity when inserting a bat-
tery. Replace the cover.
Note
Remove the battery if you will not be using the product for an extended period of time.
Use
1. Insert the battery you want to test into the appropriate slot.
2. The display will show its charge level and the corresponding number of LED lights will
illuminate accordingly:
– LED lights illuminate into the "GOOD" range: the battery is sufficiently charged;
– LED lights illuminate into the "WEAK" range: the battery is low;
– LED lights only illuminate into the "POOR" range: the battery is dead or nearly so.
3. Remove the battery once done.
SAFETY INFORMATION
Read the safety and operating instructions. Failure to observe the safety and operating instruc-
tions can endanger people or damage the device.
This product is only suitable for household use.
Use and store the product out of the reach of children. Children must not use this product.
ENGLISH
7