Bluetooth®-Erweiterung
Geräte mit Bluetooth® erkennen
Sie an dem Bluetooth®-Logo auf
der Unterseite des Geräts.
Alle Geräte ohne Bluetooth®
können gegen eine Gebühr von 15€
mit Bluetooth® nachgerüstet werden.
Schicken Sie hierzu das Gerät an MD.
Wenn Sie ein Bluetooth® fähiges
Gerät besitzen, können Sie mit der
MD-App alle Funktionen des Gerätes
steuern. Laden Sie sich hierzu die App
von der offiziellen MD-Website
oder aus dem App-Store® (Play-Store®)
herunter.
Sie benötigen hierzu ein Android® fähiges
Smartphone, oder einen Bluetooth® fähigen
Computer. Letzteres benötigt das MDTerm.
Das Passwort beträgt standartmäßig 1207.
Das Gerät kann vom PC aus mit dem Tool
MDTerm® gesteuert werden.
Verbinden Sie sich hierzu mit dem MD Bluetooth®
Gerät und gucken Sie unter der Verbindung „Details"
nach, welcher COM-Port vergeben wurde
(bleibt nach einmaliger Einrichtung immer gleich).
Danach öffnen Sie MDTerm ®.
Nun brauchen Sie nur noch auf „Verbinden" klicken
Wählen Sie anfangs Ihr Gerät aus. Bei Fragen
klicken Sie bitte auf das „?".
16
Bluetooth®-Extension
Devices with Bluetooth® recognize
click on the Bluetooth® logo the undersite
of the device. All devices without
Bluetooth® able for a fee of 15€ be
retrofitted with Bluetooth®.
Send the equipment to do this MD.
If you Bluetooth® enable own device, you
can use the MD App all functions of the
device control. You can download the app
for this purpose MD from official site or
from the App-Store® (Play-Store®) shut.
You will need an Android® capable
Smartphone, or a Bluetooth® enabled
Computer. The latter does not require any
app, but the MDTerm.
The Passkey is always 1207.
The device can from your PC with the tool
MDTerm® are controlled. Do this, connect to
the MD Bluetooth device and you look under
the link „Details" assigned to which COM port
was (remains after a single device
is always the same). The open MDTerm®.
Now you only need to click „ Verbinden".
Select your device from the beginning. If you
have questions, please click on the „?".
HouseBasic (Bluetooth®)