HOGERT HT2E218 Bedienungsanleitung Seite 6

1. Safety Warnings
Caution
Read all safety instructions and warnings provided with power tool. Failure to follow the instructions below may result in electric
shock, fire and / or serious injury.
Keep all warnings and instructions for future reference.
The term „ power tool „ used in the safety instructions refers to mains operated power tools
( with power cord) or to battery operated tools ( without power cord).
General safety warnings for power tools
1.1 Safety in work area
a) Keep your work area clean and well lit. Disarray or unlit work areas can lead to accidents .
b) Do not work with the power tool in a potentially explosive environment in which flammable liquids, ases or dusts are present. Power
tools generate sparks that can ignite the dust or fumes.
c) Keep children and bystanders away while using the power tool. Distractions can result in a loss of control.
1.2 Electrical Safety
a) The plug of the power tool must fit into the socket . The plug must not be changed in any way. Do not use adapter plugs together with
electrically grounded power tools . Unmodified plugs and matching sockets reduce the risk of electric shock.
b) Avoid body contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators. There is an increased risk of electric
shock if your body is grounded.
c) Keep power tools away from rain or moisture. The penetration of water into a power tool increases the risk of electric shock.
d) Do not misuse the power cord to carry the power tool , hang it up , or unplug it from the power outlet. Keep the connection cable away
from heat , oil , sharp edges or moving parts . Damaged or entangled leads increase the risk of electric shock.
e) When working outdoors with a power tool , only use extension cables that are also suitable for outdoor use. Using an extension cord
suitable for outdoor use reduces the risk of electric shock.
f) If operation of the power tool in a damp environment is unavoidable , use a residual current device. Using a residual current circuit
breaker reduces the risk of electric shock.
1.3 Personal Safety
a) Be attentive , pay attention to what you are doing and be reasonable about working with a power tool. Do not use a power tool when
you are tired or under the influence of drugs, alcohol or medication. A moment of carelessness when using the power tool can cause
serious injury.
b) Wear personal protective equipment and always safety goggles. Wearing personal protective equipment such as a dust mask , non
- slip safety shoes , hard hat or ear protection, depending on the type and use of the power tool , reduces the risk of personal injury.
c) Avoid unintentional startup. Make sure that the power tool is switched off before connecting , receiving or carrying it to the power
supply and / or the battery. Keeping your finger on the switch when you are wearing the power tool or plugging the power tool into
power can cause an accident.
d) Remove setting tools or wrenches before turning on the power tool. A tool or key located in a rotating part of the power tool can.
e) Avoid an abnormal posture . Ensure a secure footing and maintain balance at all times. This allows you to better control the cause
injury. power tool in unexpected situations.
f) Wear suitable clothing . Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts . Loose clothing ,
jewelry or long hair can be caught by moving parts.
g) If dust extraction and collection equipment can be installed, they must be connected and used properly. Using a dust extractor can
reduce dust hazards.
h) Do not weigh yourself in false safety and do not overstep the safety rules for power tools , even if you are familiar with the power tool
after many uses. Careless action can lead to serious injuries within fractions of a second.
1.4 Use and care of the power tool
a) Do not overioad the power tool. Use the appropriate power tool for your work . With the right power tool you work better and safer
in the specified power range.
b) Do not use a power tool whose switch is defective . A power tool that can not be turned on or off is dangerous and must be repaired.
c) Unplug the power cord and / or remove a detachable battery before making any adjustments to the device , changing the tool bits, or
putting the power tool away. This precaution prevents the unintentional start of the power tool.
d) Store unused power tools out of the reach of children. Do not allow persons to use the power tool that are unfamiliar or have not read
these instructions. Power tools are dangerous when used by inexperienced people.
e) Maintain power tools and insert tools with care . Check that moving parts are working properly and do not jam, that parts are broken
or damaged enough to impair the functioning of the power tool. Have damaged parts repaired before using the power tool. Many
accidents are caused by badly maintained power tools.
f) Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges become less jammed and easier to
guide.
g) Use power tools , accessories , tools etc . according to these instructions. Take into account the working conditions and the activity to
be performed. The use of power tools for other than intended applications can lead to dangerous situations.
h) Keep handles and grips dry, clean and free of oil and grease. Slippery handles and gripping surfaces do not allow safe operation and
control of the power tool in unforeseen situations.
6
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland S.A., ul. Przejazdowa 21, 05-800 Pruszków