Manual Mode; Eco Mode; Automatic Mode; Manual Operation On Smart Radiator Thermostat - Emke Rth1W Bedienungsanleitung

03
MANUAL OPERATION ON SMART
RADIATOR THERMOSTAT
To simply the operation on thermostat, it will just allow to manually control the temperature on the
thermostat by three modes by tapping icon

Automatic mode.

3.1 Manual mode

Press the button to enter the manual mode.
Set temperature can be adjusted by using the
hold the button to speed up.
Once the desired temperature setting under manual mode is completed, in few seconds, it will automatically show
the current room temperature and current mode on the display.
Symbol will be displayed when heating and disappear when it is not heating.

3.2 ECO mode

Press the button to enter the Eco mode. The default set temp is 17 °C.
Set temperature can be adjusted by using the
hold the button to speed up.
Once the desired temperature setting under Eco mode is completed, in few seconds, it will automatically show the
current room temperature and current mode on the display.
Symbol will be displayed when heating and disappear when it is not heating.
3.3 Automatic mode
Press the button to enter the Automatic mode.
Under the automatic mode, the icon will be displayed on the screen, and the STRV is running under automatic
mode by default temperature even the temperature on the display can be regulated (you can read the default
temperature chart of automatic mode by end of the manual).
Once automatic mode is chosen, in few seconds, it will automatically show the current room temperature and
current mode on the display.
09
to switch between modes: Manual mode, Eco mode,
and buttons. The range is 5-35 °C in steps of 0.5 °C. Press and
and buttons. The range is 5-35 °C in steps of 0.5 °C. Press and
04
OPERATION ON THE APP

4.1 Control interface

ON/OFF
Adjust temperature

Choose mode

4.2 Choose mode
Tap the mode button on the interface to choose Manual, ECO and Auto mode.
4.2.1 Manual mode
In manual and Eco mode, simply use the sliding dial or the
4.2.2 Eco mode
In manual and Eco mode, simply use the sliding dial or the

4.2.3 Auto mode

In Auto mode, you can use presetting program to work the device, the default program can be found by end of the manual.
If you hope to amend the program, it can be editable on the interface "Program "

4.3 Program Data

Tap the "Program" on the control interface to configure a program. The program consists of 4 different periods intervals
for each day.
Option 1: You can follow the default program setting without any operation.
Option 2: You can modify the default setting to your preferred program setting following the instruction on the interface
for different period.
Program
Setting
Room temperature
Adjust temperature
and to adjust the set temperature.
and to adjust the set temperature.
10