Application; Personnel Protection Safety Rules - Autool C701 Bedienungsanleitung

Application

Personnel
protection
safety rules
Before use, inspect the power cord, charging cable, and
charging connector for any damage. If any damage is
found, do not operate the equipment.
Use the equipment only if all safety instructions, techni-
cal documentation, and vehicle manufacturer specifica-
tions are met.
Changing settings during equipment operation is prohib-
ited. Any modifications to settings must be made after
the equipment has stopped running.
It is strictly prohibited to plug or unplug the charging
connector while charging, to avoid accidents and
irreversible damage to both the charger and the vehicle.
Personal protective equipment must be worn before
installation, calibration, and maintenance.
During equipment maintenance, there must be at least
two people on-site: one to operate and one to supervise.
After the equipment stops running, there may still be
residual voltage, posing a risk of electric shock! The
cabinet door must not be opened until 10 minutes after
disconnecting the input and output power. Use a
multimeter to measure the DC output voltage and ensure
it is 0V before performing maintenance.
Any other use is considered beyond the intended purpose of the
equipment and is prohibited.
6