Connecting A Device To The Dual Dock - Samsung DA-E750 Bedienungsanleitung

cOnnecting a DeVice tO tHe DUaL DOcK

How to connect a device to the Dual Dock.
LAN
WPS AUX IN ONLY FOR
SERVICE
USB 5V 500mA
POWER
1. The DUAl DOcK is located on the back of the product. To open, push it in gently.
2. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the
display.
~ Each time you press the button, the selection changes as follows :
; ; ;
~ The selected mode is displayed in white in the Function Display.
3. If you have a Samsung Galaxy device, connect the device to the 5 pin (smaller) connector to connect to the Dual
LAN
WPS AUX IN ONLY FOR
SERVICE
Dock. If you have a Apple device, connect the device to the 30 pin (larger) connector on the Dual Dock.
USB 5V 500mA
POWER
4. Lift the device support up as shown to prevent the device from sliding or falling off the Dual Dock.
▪
Turn on your Samsung Galaxy device before you attach it to the Dual Dock.
▪
This unit doesn't support the simultaneous docking of Samsung Galaxy and Apple devices.
▪
Connect your Samsung Galaxy or Apple device to the Dual Dock before starting Docking mode.
(See page 23)
PUSH
LAN
WPS AUX IN
USB 5V 500mA
POWER
PUSH
LAN
WPS AUX IN
USB 5V 500mA
POWER
; ; ; aUX (LeD Off)
PUSH
ONLY FOR
SERVICE
ONLY FOR
SERVICE
LAN
WPS AUX IN ONLY FOR
SERVICE
USB 5V 500mA
POWER
icon appears in the
13