YitaHome ZSSX-V1 Bedienungsanleitung Seite 4

YITAHOME
SAFETY CUT-OUT SYSTEM
NOTE: The LED display panel will remain operational if the cut-out is activated, only the fan heater elements are prevented from
operating.
This product has one non-self-resetting overheat protection device (thermal cut-out) which will activate if the air inlets or outlets are
obstructed. For safety reasons the fire will NOT switch on again automatically, the following procedure must be carried out before the
fire can be operated.
NOTE: The visual effect will remain operational if the cutout is activated, only the fan heater is prevented from working.
Switch OFF the appliance at the wall socket or outlet. Leave the fire OFF for a period of no less than 10 minutes, ensuring all
obstructions are removed. Switch the appliance ON at the wall. Ensure the appliance is turned ON at the control switches. If the fire
fails to operate correctly, repeat the above procedure. If an attempt to switch on the appliance is made before the safety cutout has
reset, the appliance may cut out for a further period of time. If the sequence has been followed correctly and the appliance still fails to
function, check the fuse in the wall outlet. If this is not the cause, call an electrician or maintenance engineer.
3
YITAHOME
ASSEMBLY INSTRUCTIONS
Model Identifier: Orion 23G
Item Symbol Value
Heat Output
Nominal heat P 2.0
nom
output
Minimal heat P N/A
min
output
Maximum P 2.0
max
continuous
heat output
Auxiliary electricity consumption
At nominal el N/A
max
heat output
At minimum el N/A
min
heat output
In standby el 0.35
SB
mode
MH STAR UK LTD
Contact
Details Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH
Unit Item
Type of heat input, for electric storage local space
heaters only (select one)
kW manual heat charge control, with integrated
thermostat
kW manual heat charge control with room and/or
outdoor temperature feedback
kW electronic heat charge control with room
and/or outdoor temperature feedback
fan assisted heat output
kW Type of heat output/room temperature control
(select one)
kW single stage heat output and no room
temperature control
kW two or more manual stages, no room
temperature control
with mechanical thermostat room
temperature control
with electronic room temperature control
with electronic room temperature control plus
day timer
with electronic room temperature control plus
week timer
Other control options (multiple selections
possible)
room temperature control with presence
detection
room temperature control, with open window
detection
with distance control option
with adaptive start control
with working time limitation
with black bulb sensor
4
Unit
No
No
No
No
No
No
No
No
No
Yes
No
Yes
No
No
No
No