battery terminals tighter may cause burns or a
fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS
WARNING: Fire hazard.
•
Do not operate fan or charger near
flammable liquids or in gaseous or
explosive atmospheres. Internal sparks
may ignite fumes causing personal injury.
•
Do not wash fan with water or allow water
to get inside the fan. Do not submerge fan
in water at anytime.
•
While fan is in use, do not cover with
cloth or other flammable materials due to
increased risk of fire.
•
The fan is intended for commercial and
household use.
•
Store the fan indoors when not in use.
•
Make sure extension cord is located so that
it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
•
Use only a proper extension cord that is
necessary to operate the fan on AC power.
Use of an improper extension cord could
result in risk of fire, electric shock, or
electrocution.
•
Disconnect the fan from the outlet before
attempting any cleaning. This will reduce
the risk of electric shock. Removing the
battery pack will not reduce this risk.
WARNING: Do not use the fan with any
solid-state speed control device.
CAUTION: When not in use, place fan on its back
on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery
pack but may be easily knocked over.
WARNING: Use of this tool can generate and/
or disperse dust, which may cause serious and
permanent respiratory or other injury.
Air vents often cover moving parts and should be
avoided. Loose clothes, jewellery or long hair can
be caught in moving parts.
www.evolutionpowertools.com
ADDITIONAL ACCESSORIES
In addition to the standard items supplied with
this machine the following accessories are also
available from the Evolution online shop at www.
evolutionpowertools.com or from your local
retailer.
DESCRIPTION
DC Adaptor UK
DC Adaptor EU
DC Adaptor USA
RECOMMENDED BATTERIES/CHARGERS
Description
2Ah Battery
R18BAT-Li2,
R20BAT-Li2
4Ah Battery
R18BAT-Li4,
R20BAT-Li4
5Ah Battery
R18BAT-Li5,
R20BAT-Li5
8Ah Battery
R18BAT-Li8,
R20BAT-Li8
R18RCH-Li1- Single
R18RCH-Li1,
dock charger
R20RCH-Li1
R18RCH-Li2 -
R18RCH-Li2,
Double dock
R20RCH-Li2
charger
If you intend to store a battery for a period
without use then store battery at room
temperature (0°C to 20°C) When storing for very
long periods boost charge the battery once per
year to prevent over discharge. The Ambient
temperature range for tool and battery use: 0°C
to 40°C. The charging temperature: 5°C to 40°C.
•
Rechargeable batteries are to be removed
from the appliance before being charged.
•
Exhausted batteries are to be removed
from the appliance and safely disposed of.
•
If the appliance is to be stored and unused
for a long period, the battery should be
removed.
•
The supply terminals are not to be
short-circuited.
6
PART NO
MX24W1-1202000B
MX24W1-1202000V
ZD36W220150US
Part No
EBAT18-Li-2
EBAT18-Li-4,
EHPB18-Li-4
EBAT18-Li-5
EHPB18-Li-8
EFC18-Li
EMC18-Li