POWERCOLOR Red Devil RX 9070 XT Limited Edition Installationsanleitung Seite 8

Graphics Card Remover Usage Guide
1
3
5
1 Turn off computer, switch off the PSU, and disconnect the power cord.
2
Remove the side panel of the computer case.
3
Unscrew the graphics card retaining screws.
4
Disconnect the PCIe power cables and the display cables from the graphics card.
5
Carefully use the Graphics Card Remover to press down on the latch at the end of the PCIe slot.
* If the graphics card is too thick and obstructs access to the PCIe slot latch, use the other end of the
Graphics Card Remover to reach in and press the latch.
* Some motherboards feature a built-in button that unlocks the graphics card slot with a single press.
6
Once all cables connected to the graphics card are disconnected, lift the graphics card vertically to
remove it.
2
4
6
8