ledscom LC-L-425-WW Montagehinweise Seite 5

English Garden light (LC-L-425-WW) - Assembly instructions
Figure 1
Mount the bollard light on firm ground or
with a ground spike using the enclosed
screws and dowels (3).
Operating instructions
1. Remove cover
To gain access to the inside of the light,
remove the cover by pulling it upwards.
2. Switching the light on and off
The light has a switch inside. Switch the
light on or off by moving the switch to the
desired position.
3. Replacing the batteries
If the performance of the light deteriorates,
you can replace the batteries:
- Use AA rechargeable batteries (600
maH) as a replacement.
- Detach the circuit board
- Remove the old batteries from the
holders.
- Insert the new batteries correctly
according to the polarity markings ( /-).
- Replace the circuit board correctly.
4. Replace the lid
After completing all the steps, place the
cover firmly back on the light.
Note: Use high-quality, rechargeable
batteries to ensure the function of the solar
technology.
Subject to technical changes 04/2025