Assmann SYMPAS STS Benutzerinformation Seite 7

Technical data
JCB36N2-230, JS36DR1-3-6 - Sympas (J)
Control and motor system:
Adjustment mechanism:
Synchronization:
Tube diameter of the lift columns:
Temperature range at point of use: + 5°C to + 40°C
Max. relative humidity:
Rated voltage:
Rated frequency:
Intermittent periodic duty:
Maximum load:
Protection class:
Maximum power consumption
during lifting operation:
Power consumption in
standby mode:
Traversing speed:
Maximum adjustment range:
Control panel up / down:
Operating panel with
memory function:
Noise emission:
Rating plates are located on the control system housing,
the lift columns and underneath the desktop.
JIECANG Linear Motion Technology Co., Ltd.
Spindle adjustment in the leg
electr. synch. by electr. control unit
80/50 mm / 75/45 mm / 70/40 mm (outside / middle / inside)
80 %
230 V ~
50 Hz
max. 2 min / 18 min
Desk:
CPU holder:
Equipment holder:
IP 20
2 lift columns 400 W
< 0.1 W
50 mm/s (without load)
650 mm
Standard
Optional (wired)
< 48 dB(A)
100 kg
15 kg
15 kg
S Y M P A S ( J ) S T S I N S T R U C T I O N S H E E T
7