Charger Features - Fireboard Pulse Schnellstartanleitung

Charger Specifications
Charger Dimensions
Charger Weight
Charger Plug Type
Charger Battery

Charger Features

LED Status Indicators
When the charger is unplugged, the probe-side LED will blink red
while charging a probe and turn off once fully charged. The charger
side will not display any LED activity in this state. When the charger
is plugged into a USB-C power source, the probe side LED will
glow solid red during charging and turn off when the probe is fully
charged.
On the charger side, the LED will glow solid red while charging and
switch to solid green once charging is complete, remaining lit to
indicate a full charge.
Stacking Capabilities
Chargers can be stacked to pass USB power through up to six units,
enabling efficient multi-device charging. When stacking, ensure all
chargers are aligned in the same orientation for proper functionality.
Device Compatibility
When pairing via Bluetooth, the Pulse is compatible with:
FireBoard 2
FireBoard 2 Drive
FireBoard 2 Pro
When pairing via S1G, the Pulse is compatible with the
FireBoard 2, FireBoard 2 Drive, and FireBoard 2 Pro, provided
the S1G Antenna is connected to the device.
For the best user experience, we recommend pairing via S1G
as the low-frequency signal has greater connectivity range.
6.26 W x 0.71 H x 0.81 D inches
(15.90 cm W x 1.80 cm H x 2.06 cm D)
1.6 oz
USB-C
320mAh / 14 complete charge cycles
FireBoard Spark
Smartphone (iOS)
Smartphone (Android)