Moni LIFTY Gebrauchsanweisung Seite 6

ASSEMBLING THE POTTY LADDER
1.MOUNTING TOP LEGS TO POTTY TRAINING SEAT- FIGURE 1: Mount the upper legs into the front of
the seat. Place the legs into the corresponding seat openings and tighten them with a screw as
shown in Figure 1.
2.MOUNTING MIDDLE STEP AND BOTTOM LEGS TO THE UPPER ONES - FIGURE 2: Align the openings
in the upper legs with the openings in the middle step and assemble them with light pressure. Install
the lower legs to the middle step by inserting one screw at each support point and tighten carefully as
shown in Figure 2. Do not overtighten the screws or you may damage their heads.
ATTENTION! The screws may loosen after use, so you should check them regularly and tighten them
when necessary.
3.INSTALLING THE BOTTOM FOOTSTEP TO THE LOWER LEGS - FIGURE 3: Insert the bottom leg into
the opening on the bottom support step and press until you hear a "click" sound and the pin shows
through the opening.
4. INSTALLING THE ANTI-SLIP STOPPERS – FIGURE 4: Install the anti-slip stoppers at the base of the
stair (the lower support step ) and around the sides of the adapter (see Figure 4).
MANUFACTURED FOR MONI;
MANUFACTURER AND IMPORTER: MONI TRADE LTD
ADDRESS: BULGARIA, SOFIA, QUARTER TREBICH, DOLO STR. 1;
TEL.: +359 2/ 936 07 90, ; WEB: www.moni.bg
5