Arizer XQ2 Bedienungsanleitung Seite 22

CLEANING AND MAINTENANCE
Unplug unit from outlet before cleaning. Let the unit and all parts cool down
before handling and/or cleaning.
glass parts to cold water or extreme temperature
cracking and breaking of the glass.
All parts/screens are removable for ease of cleaning. Regular Isopropyl Rubbing
Alcohol, cotton swap, Pipe Cleaners,
soak the tubing in alcohol as it may absorb the smell/taste.
screens are safe to soak. When parts are clean, rinse thoroughly under hot water.
Repeat as necessary. Make sure all the glass parts and accessories
before the next use.
If you experience difficulty removing the tubing from the glass parts, soak the
tubing in hot water for a few minutes and the tubing will become softer and more
pliable to work with.
To clean the warming unit and remote do not use any abrasive or hard cleaners,
a simple soft cloth dampened (not wet) with warm water will do the job. Contact
cleaner for keyboards and electronics
If materials are spilled down inside the unit, turn the unit OFF and unplug. Turn the
unit upside down and gently shake it back and forth until the debris falls out.
Replacing the Air Intake Filter
To maintain optimal performance, periodically change the filter in the reusable Air
Filter Cartridge.
. Unplug the XQ2 and ensure that all parts have fully cooled.
2. Turn it upside down and pull the tab on the bottom of the unit to open the air
filter compartment.
3. Remove the plastic Air Filter Cartridge by grasping the two finger holes.
4. Insert your finger in the large opening and pull off the perforated cover
(exposing the white filter) and remove the old filters.
5. Insert the new black filter into the Cartridge,
white side facing out.
6. Replace the top of the Cartridge, ensuring the two tabs snap into place inside.
7.Place the Cartridge back into the bottom of the XQ2 with the two finger holes
facing outward.
8. Close the air filter compartment
tabs lock with an audible
20
When cleaning any glass DO NOT expose hot
change, as this will cause
etc. can be used to clean/sterilize.
can also be used.
then place the second filter with
cover by pressing the cover down until both
click.
Do not
All glass and metal
are fully dry
Air Filter