Calibre TransferMan 4m Gebrauchsanweisung Seite 91

Parameter Function
Limit Activate or deactivate the vertical or horizontal (X axis) limit
Step injection The use of this function is not approved for medical applications
Limit up Amend value for
Limit down Amend value for
Clean Axial movement out of the working area and back
Only control of movements in the Z-axis. The control of movements in the X
Z-axis only
and Y-axis is deactivated
LCD light Set the brightness level of the display
Beeper
Set the volume
Joystick off Deactivates all joystick movements
X-axis off Switch the control of the movement axis on or off
Z-axis off
Switch the control of the movement axis on or off
Only control of movements in the X-axis. The control of movements in the Y
X-axis only
and Z-axis is deactivated
Only control of movements in the Y-axis. The control of movements in the X
Y-axis only
and Z-axis is deactivated
Dyn-mode Activate or deactivate the dynamic movement range
Parameter Range of values
No function
Switch position
Joystick key
Switch fine
6.19.2 Executing
1. Select a free softkey and confirm with Enter.
2. Select the required parameter and confirm with Enter.
3. Close the menu.
The selected parameter has been assigned to the free softkey.
The parameter appears on the application screen.
Z-axis Limit
Z-axis Limit
Function
Deactivate the function of the joystick key
Double-click to go to the next saved position
Double-click to go to the
working range
Softkeys
TransferMan
upwards
downwards
fine
4m English (EN)
®
or x-fine
91