Bluetooth Connection - 8Bitdo Retro 87 Bedienungsanleitung

Bluetooth Connection

BT
1. Turn the Mode switch to BT.
8BitDo Retro Keyboard X
3. Go to your device's Bluetooth list and pair with "8BitDo Retro Keyboard X", the Connection indicator will remain solid for 8 seconds and
then go off to indicate a successful connection.
Battery
Built-in 4000mAh battery pack, 300 hours of usage time via Bluetooth connection and 280 hours via wireless 2.4G connection (with RGB off), rechargeable
with 6 hours charging time.
Status
Low battery
Battery charging
Fully charged
• The keyboard will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations
within 15 minutes after establishing a connection.
• The keyboard will not shut down during wired connection.
• Charging and battery life depend on variations in settings or environmental factors, and actual results may vary.
3 seconds
2. Hold the Pair button for 3 seconds to enter its pairing mode, the Connection indicator will
start to blink rapidly. (This is required for the very first time only)
LED indicator
Power indicator blinks
Power indicator breathing
Power indicator stays solid
05