Next Level Racing F-GT Pro Bedienungsanleitung Seite 8

support@nextlevelracing.com
A)
Tip: If monitor has 75x75mm or 100x100mm
mounting holes, mount VESA Plate to rear of
monitor before attaching VESA Mount.
04
A) Align the mounting holes on the VESA Plate with the inserts on the VESA Mount.
B) Bolt through into the inserts and secure using M8 Bolts and Washers.
Tip: Do not screw bolts all the way in.
05 Select mounting height and screw M8 Bolts into inserts on Support Arm. Leave approximately 10mm
of exposed thread for ease of mounting.
Tip: Easier with two people.
06
Secure VESA Plate Assembly to mounting holes on rear of monitor. Align VESA Plate and Monitor
Assembly with bolts on Support Arm. Hook Assembly through the VESA Mount slots.
B)
SIDE VIEW DETAIL
8
PARTS:
• • 1 x VESA Plate
• • 1 x VESA Mount
• • 4 x M8 16mm Button Head Bolts
• • 4 x M8 Washers
PARTS:
• • 4 x M8 20mm Wide Button Head
Bolts
PARTS:
• • NIL