Assembly And Use - Storchenmuhle Nik Bedienungsanleitung

ASSEMBLY AND USE

1) Assembly of the carrycot
Remove the carrycot cover by undoing the
press studs and opening the zipper. Then
remove the mattress. Open the inner zipper
in the carrycot so that you can remove the
inner cover. Push the metal brackets from
the inside out into the fi xings so that the
baby bath stands upright. Check that the
metal brackets are fully seated in the fi xing
points. Reinsert the insert and close the zip-
per. Put the mattress back in and attach the
baby bath cover. The front sun visor on the
canopy of the carrycot may be removed for
transportation reasons. Reattach them to
the canopy using the zipper.
2) Use of carrycot with frame
Place the carrycot on the frame and make sure
that the carrycot holders are fully engaged.
To remove the carrycot from the frame, simul-
taneously press the button (h) on each side of
the carrycot, and then lift it out of the holder
using the carrying handle (a). Make sure that
the carrying handle is in a vertical position and
locked into place when lifting out.
Please note: It is not possible to fold the fra-
me with the carrycot. Remove the carrycot
before folding. Note: Always apply the par-
king brake before each folding process. the
frame and sports seat must be purchased
separately.
3) Soft top
The canopy can be opened and closed as
required. To do this, press the two buttons
(f) on the inside of the soft top.
4) Ventilation window and panoramic
window
There is an additional ventilation window (d)
on the canopy, which you can use by folding
- 15 -
up the fabric cover on the lower section of
the canopy.
There is a panoramic window (g) in the head
section of the carrycot. To use this, open the
zipper, fold the fabric cover up twice and fi x
it in place using the magnets so that the pa-
noramic window remains open.
5) 2in1 sun awning with mosquito protec-
tion
Attach the 2in1 sun awning (i) to the canopy
using the zipper. Also attach the sun canopy
to the outside of the carrycot using the ela-
stic loops. For easy everyday use, you can
stow the awning in the front section of the
canopy without removing it.
6) Rocking function
The carrycot has a rocking function that
may only be used on a fi rm, level and dry
surface. Use on the frame is not possible.
To use the cradle function, fold out the feet
(j) on the underside of the carrycot so that
they become runners. Now the carrycot can
be moved from one side to the other with
gentle movements.
7) Carrycot cover
If necessary, the carrycot cover can be re-
moved from the carrycot using press studs
and a zipper.
EN