VEVOR DX-14VA Bedienungsanleitung Seite 7

Name
Water Heater
User Manual
Safety valve
METHODS OF INSTALLATION
● Equipment Installation
① After the installation position of the appliance is determined, drill two
holes with a spacing of 2.44 inch and a diameter of φ0.394 inch in the
horizontal direction of the wall according to the size as shown in the
following figure, and the hole depth shall not be less than 2.76 inch. Insert
two plastic expansion tubes into the hole, and secure the host mounting
plate with fastening screws.
② Align the two hanging holes on the back of the appliance with the two
hooks of the hanging plate and pull down with force to make the hanging
holes hang into the hook.
Warning: The appliance must be hung securely to prevent personal
Tube Connection
PACKING LIST
Quantity
1
1
1
injury and property damage from falling.
Name
Bracket
Plastic Expansion Tube
Fastening Screw
Install the wall hole
- 6 -
Quantity
1
2
2