VEVOR YX-RGXB01 Anleitung Seite 8

Section 2:install the softbox
1.Open the softbox and press
the snap ring onto the lamp
holder
4.Glue the Velcro on the four
sides
7.Tighten the softbox knob
clockwise(please install the
softbox completely onto the light
stand, as shown in the picture)
10.Adjust the softbox downward
to the angle you want to shoot
2.Rotate the LED bulb into the
E27 holder
5.Loosen the knob of the
softbox
8.Loosen the upper knob of the
softbox
11.Plug in socket and press the
switch button
- 8 -
3.Cover the four corners with a
front diffuser
6.Install the softbox to the light
stand
9.Adjust the head of the soft box
upward to adjust the soft box to
210%
12.Completely mount the
softbox on the light stand as
shown in the picture