Chipolino ENCANTO 3 in 1 Gebrauchsanweisung Seite 12

IMPORTANT! Periodically check that the belts are firmly
attached to the structure of the stroller and that the fas-
tening is secure! Belts must not be frayed or torn, and
plastic buckles and buckles must be strong, undamaged
and provide a secure connection.
14. Folding the stroller:
Always before folding the stroller, you must activate
the parking device and empty the luggage basket;
14-1 - Press the backrest adjustment mechanism and
push the backrest forward to fold the seat.;
14-2 – Place the handle in the highest position. Press
buttons 1 and 2 at the same time, then force the handle
down (3) until the mechanism is unlocked and the handle
is fully folded (4);
14-3 - Fold the frame and pull up with your hand until
you hear a "click" sound. The stroller is fixed in the folded
position.
CARRYCOT FOR A NEWBORN
15-1. Main parts: mattress (1), basket (2), cover (3).
15-2. Unfold the Carrycot:
Pull the support levers out in the direction of the arrows
until they lock into the grooves of the base and you hear
a "click".
15-3. Folding the carrycot:
Pull the two levers out of the channels and retract.
15-4. Attaching the foot cover:
Place the foot cover on the basket and fasten the zipper.
Attach to the sides of the basket with velcro strips, and to
the canopy - with tic-tac buttons.
16. Adjusting the canopy handle:
16-1 - To unfold the canopy, move the handle forward.
When fixing, you will hear a "click" sound; To fold the can-
opy, press buttons B on both sides and move the handle
back.
ATTENTION! WHEN CARRYING THE CHILD IN THE
BASKET, THE HANDLE MUST BE IN THE UPPER PO-
SITION!
17. Mounting the bin on the trolley frame:
ATTENTION! ALWAYS INSTALL THE HARD BASKET
SO THAT THE CHILD IS FACING THE MOTHER!
Note: For your convenience, before mounting the hard
basket to the cart frame, engage the parking device.
Attach the basket to the frame of the cart as shown in
the figure. Press down until you hear a "click" sound and
the basket locks in place.; To remove the basket, press
the button (D) and pull the basket out of the frame.
INSTALLATION AND DISASSEMBLY
OF THE ENCANTO CAR SEAT
ON THE STROLLER FRAME
ATTENTION! THE
BE INSTALLED SO THAT THE CHILD IS FACING
THE MOTHER!
Note: For your convenience, before attaching the car
seat to the stroller frame, engage the parking device.
CAR SEAT MUST
18-1. Mounting adapters to the car seat:
The car seat is mounted to the stroller frame using adapt-
ers. Place the adapters (1) on the left and right sides of
the seat. You will hear a "click" sound when you fix each
of them.
18-2 Mounting the car seat to the stroller frame:
Before installing the car seat to the stroller frame, engage
the parking device.
Align the adapters to the frame and press until you hear
a "click" sound.
To disassemble the seat: Press buttons (1) on both sides
of the adapters and remove the adapters from the stroller
frame.
PREVENTION AND MAINTENANCE
INSTRUCTIONS
Regularly clean and oil contaminated metal and plastic
parts.
* Clean the damask, dirty plastic or metal parts
of the product using a soft cotton cloth or sponge
moistened with water or a mild detergent.
* Do not clean with aggressive detergents containing
abrasive particles, ammonia, bleach or alcohol.
* Always dry the product, let it dry before putting it away
for storage. Mold may develop on the product if it
is stored moist.
* Store the product in a clean and dry place. Do not
expose to the direct impact of the environment - sun,
rain, moisture, or sudden temperature changes!
Brakes, wheels and tires wear out faster than other
parts. If necessary, you should replace them.
* Regularly
oil or spray.
ALWAYS
11
lubricate the actuators with silicone