Chipolino ENCANTO 3 in 1 Gebrauchsanweisung Seite 11

ASSEMBLY AND FUNCTIONS
"ENCANTO" 3 in 1 set consists of:
• The stroller, suitable for newborn babies or children up to 4 years of age or up to 22 kg in weight
(whichever comes first);
• The carrycot for a newborn, intended for one child aged no more than 6 months and weighing
no more than 9 kg. Can be used on its own or mounted on the stroller frame;
• Seat for securing children while traveling in an "ENCANTO" model car, for children with a height
of 40 to 87 cm and a weight of ≤ 13 kg.
Note: Instructions for safe use of the seat and its installation in a car are in a separate instruction.
The seat, carrycot and car seat are safe and compatible with the stroller's construction.
You don't need to use any tools to assemble the stroller.
ATTENTION! Follow exactly the instructions and sequence for assembly and use from the text
and illustrations attached to the instruction.
ATTENTION! Check the security of the fixation after performing each operation!
ATTENTION! Fixing a certain position is in most cases accompanied by a clicking sound.
1. Main parts:
1 - Canopy;
2 - The handle;
3 - Rear wheel (2 pcs.);
4 - Luggage basket;
5 - Front wheel (2 pcs.);
6 - Safety belt;
7 - Safety board.
2. Unfolding the stroller:
2-1 - Unfold the stroller frame;
2-2 - Simultaneously press the buttons on the handle and
pull the handle up until you hear a click;
2-3 Unfold the seat and backrest until you hear a "click".
3. Installing and removing the rear wheels:
Install the axle of each wheel into the rear axle holes until
you hear a "click" sound. To remove on each wheel, press
button A and pull the wheel out.
4. Installing and removing the front wheels:
Press each of the wheels into the frame holes until you
hear a "click" sound. To remove, pull lever B and remove
the wheel from the frame.
5. Changing the position of the seat on the frame:
The seat can be installed on the frame of the stroller in
two positions - the child is facing the direction of move-
ment (I) or the child is facing the adult (II - opposite to the
direction of movement). Place the seat on the frame and
press until you hear a "click";
To change the position of the seat, press the disassembly
buttons C on both sides of the frame, pull the seat up,
turn it 180 ° and refit it.
6. Mount and remove the guard board:
Place the two ends of the guard board to the frame and
press. When fixed, you will hear sound "click/click".;
To remove, press buttons D on the inside and pull
the board out.
7. Straight-line and rotary movement
of the front wheels:
For straight-line movement of the front wheels, move
the sliders L down. For rotary movement (360°) - move
the L sliders up.
IMPORTANT! When moving the stroller on uneven
surfaces, set the front wheels in a straight-line position
8. Parking aid:
Press the pedal (1) to activate the parking aid.
Lift the pedal up (2) to release it.
IMPORTANT! Activate the parking device whenever
the stroller is at rest, for
to avoid the danger of slipping!
9. Adjusting the backrest (3 positions):
Pull out the device P on the back of the backrest and
adjust the inclination of the backrest up or down to the
desired position.
ATTENTION! Do not push the backrest by hand, always
use the adjustment mechanism P!
10. Footrest adjustment (3 positions):
Press the K buttons on both sides of the footrest
and move it up or down to the desired position. Fixation
in each position is accompanied by a "click" sound.
11. Sunshade adjustment:
Push the sunshade by hand (1) to fold it. Pull the canopy
by hand to unfold it (2). Unzip the canopy to increase
its area.
12. Adjusting the height of the handle (4 positions):
Press the M button on the handle and move it up or down
to the desired position. When fixing each of the positions,
you should hear a "click/click" sound.
13. Restraint System:
ATTENTION! Always use the restraint system - for new-
born babies and older children!
Adjust the height of the safety belts in three positions
according to the size of the child by pushing the shoulder
belts through the corresponding holes in the backrest!
Make sure the shoulder belts are placed at the same
height!
To unfasten the belts, press the button (2) on the unifying
current; Adjust the length of the belts from the buckles
(3). Note: Belts must fit the child well and must not be
twisted.
10