Technical Data; Specified Conditions Of Use - Würth Rb1 Originalbetriebsanleitung

GB
BATTERY EXTRACTOR
Art.
Hydraulic oil
Lengths of stroke
max. load-bearing capacity without crane arm extension
max. load-bearing capacity with the crane arm extension deployed and fully extended
Operating temperature / Storage temperature
Dimensions L x W x H
Weight
Please read and comply with these operating
instructions prior to initial operation of your
device.
Keep these operating instructions for later use
or for a subsequent owner.
The operating staff must carefully read the Operating Inst-
ructions before using the appliance.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained in
order to reach knowledge under supervision of the trainer
during occupational education.
Keep the tool out of the reach of children and never leave
it unattended.
Never make any changes to the appliance, or remove any
information signs
Repairs to the unit may only be carried out by persons aut-
horised and trained for this purpose. Always use original
spare parts from Würth. This ensures that the safety of the
unit is maintained.
The operator agrees to only allow persons to work with
the device who are familiar with the basic regulations on
occupational safety and accident prevention and have
been instructed in the handling of the device.
The operator is responsible for accidents or risks
to third parties.
16

Technical Data

Type
Recommended viscosity
ISO grade of a maximum kinematic
viscosity:
or Engler viscosity::
Filling quantity
retracted
extended
The RB1 battery and catalytic converter crane is used
to dismantle and assemble heavy vehicle batteries and
catalytic converters on commercial vehicles. Suitable for
all types of buses, trucks and industrial vehicles. Up to four
batteries can be removed per operation.
Only loads may be lifted whose weight does not exceed
the maximum load capacity specified by the manufacturer
in the technical data and on the type plate.
Any other use is considered as improper use. The manu-
facturer accepts no liability for any damage resulting from
such use. The risk for such use is borne solely by the user.
Proper use also includes proper operation, servicing and
repairs as specified by the manufacturer.
RB 1
1952 001 518
HM or HL
ISO VG32, DIN 51524-2
30°cST at 40°C
3° at 50°C
600 cm³
400 - 1.800 mm
100 kg
75 kg
< 60° C
740 x 580 x 400 mm
740 x 580 x 1.800 mm
98 kg

Specified Conditions of Use