Soundcore Life A1 Bedienungsanleitung Seite 5

1
• When earbuds are out of the charging case and powered off, to manually
enter Bluetooth pairing mode, press and hold the multi-function button on
both earbuds for 3 seconds.
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the
earbuds only by placing the other one into the charging case.
• When powered on and connected, if either one of the earbuds is out of
battery and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
• The right earbud is the primary earbud by default. If you want to change this,
remove the right earbud from your ear and place it in the charging case, the
microphone in the other earbud will be activated and become the primary
earbud.
Controls
Play/Pause
Next track
Adjust volume
2
Soundcore
Life A1
Soundcore
Life A1
Press twice (R)
Press twice (L)
Press once (L/R)
5"
EN 03