TecTake 403915 Bedienungsanleitung Seite 2

INTRODUCTION
●Thank you for purchasing our air cooler.
●Each unit has been manufactured to ensure safety and reliability.
●Before first use, read the instructions carefully and keep them for further reference.
PERFORMANCE PARAMETERS
Model
403915
DIAGRAM
ASSEMBLING AND WATERING
1.Assemble wheel: put the appliance on a flat surface, take out the wrench from foam box, then assemble the
wheel.
Attention: the back wheel is with brake, but the front one is not.(map1)
2.Watering: unlock the water tank at the bottom of back side , draw the water tank, then add water into it, then
push the water tank into the unit, and lock the water tank .
Attention:
a.Pay attention to the level of water tank when add water.(map 2)
b.The level of water tank should not over "MAX" scale at any time, when humidifying, the total level of water
tank should not below "MIN" scale.(map 3)
c.Put ice or ice-crystal box into the water tank or top place, if you want to strengthen the efficiency of cooling.
.(map 4)
ORIGINAL INSTRUCTION MANUAL
RETAIN FOR FUTURE REFERENCE
Rating Power
220-240V~50-60Hz
COOLING
2
EN
Fan power
75W
Max Water Tank
4L