VEVOR T64B Bedienungsanleitung Seite 5

WORK AREA SAFETY
a) Keep the application area clean and well lit. Unclean and dark areas lead to
accidents .
b) Do not use power tools in explosive environments, such as in the
presence of flammable liquids, gases or vapors. Power tools generate sparks
that can ignite the dust or vapors .
c) Keep children and bystanders away when operating the appliance.
Distractions can lead to loss of control over the device .
ELECTRICAL PROTECTIVE MEASURES
a) The plug of the power tool must be plugged into the socket. Never change
the plug in any way. Do not use plug adapters with grounded power tools.
Unmodified plugs and sockets reduce the risk of electric shock .
b) Avoid body contact with grounded surfaces such as piping, radiators,
stoves, and refrigerators. There is an increased risk of electric shock if your body
is grounded .
c) Do not expose electrical tools to rain or damp environments. Water
entering electrical tools increases the risk of electric shock .
d) Do not misuse the cable for any other purpose. Never pull on the cable or
use it to unplug or to carry the tool. Keep the cable away from heat, oil,
sharp edges or moving parts. Damaged or entangled cables increase the risk of
electric shock .
e) When using the power tool outdoors, use an appropriate extension cord.
The use of a cable suitable for outdoor use reduces the risk of electric shock .
f) If the use of the tool in a humid environment can not be avoided, use a
power supply protected by an earth leakage circuit breaker. The use of an
RCCB reduces the risk of electric shock
PERSONAL SAFETY
a)Stay alert, focus on your work and use common sense when using the
device. Do not use the device when you are tired or under the influence of
drugs, alcohol or medication. A moment of carelessness while operating the
power tool can result in serious injury .
b) Use safety equipment. Always wear eye protection. Suitable safety
3