9. Code confirmation
The LED indicator will blink fast to confirm the code has been received. The receiver can store up to
4 different
transmission
moved to another socket or in case of power failure.
10. Single code delete
Press the [LEARN] button fo 1 seconds to activate the learn-mode.
will
be
active
for
15 seconds.
2.
While the learn-mode
Trust SmartHome
transmitter.
The LED indicator will blink fast shortly to confirm code deletion.
3.
11. Full memory delete
Press and hold the [LEARN] button for 7 seconds until the LED indicator starts blinking fast.
he delete
mode
will be active
While the delete mode is active, press the [LEARN] button again for 1 second.
2.
The LED indicator will blink fast shortly to confirm memory deletion.
3.
ACDB-6600AC
WIRELESS
codes in its memory. The memory will be preserved
is active, send an OFF-signal to delete the code Of a specific
for 15 seconds.
DOORBELL
WITH
PORTABLE
when the receiver is
The learn-mode
CHIME
2