Parameter
Parameter
code
meaning
P1
High temperature
alarm value
P2
Low temperature
alarm value
H1
High humidity
alarm value
H2
Low humidity
alarm value
F1
Egg rotation cycle
F2
Turning operation
time
F3
Temperature
calibration
F4
Humidity
calibration
F5
Incubation days
After all the associated parameters have been set, then press the " Temperature
setting key " button to exit.
Note: the machine configuration sensor is more accurate than the market's
ordinary thermometer, and generally no deviation occurs. Please make sure that
the deviation is indeed to be adjusted. Even if the adjustment should not be
adjusted too large, otherwise it may have an impact on hatching.
Factory
default data
38.8℃
36.5℃
85%RH
30%RH
90 minutes
20 0econds
0.0℃
0%RH
1
- 7 -
Parameter description
Measure the temperature to
reach the value alarm
Measure the temperature to
reach the value alarm
Measure humidity to reach
the value alarm
Measure humidity to reach
the value alarm
Turn the egg motor once
every 90 minutes
The turning time of the egg
turning motor
Adjustment after comparison
with standard thermometer
Adjustment after comparing
with a standard hygrometer
Total incubation time