VEVOR NLF64-5280 Benutzerhandbuch Seite 8

1- Setting method of temperature and humidity
- Temperature setting method: Under normal working conditions, press the
"Setting" button to enter the temperature setting.
- At this time, the temperature display flashes. Press "+" or "-" can adjust the
temperature.
After the adjustment is completed, press the "Set" button to save the temperature
setting. At this time, the screen will display all "8" to indicate that the parameter
setting is successful and automatically enter the humidity parameter setting;
- At this time, the humidity display flashes, click "+" or The "-" flashing value will
increase or decrease accordingly until you reach the humidity value you need.
- After the adjustment is completed, press the "Set" button to save the humidity. At
this time, all "8" is displayed on the screen, indicating that the parameter setting is
successful.
Note: Long press "+" or "-" to quickly increase or decrease the value;
2- Setting methods of temperature and
humidity-related parameters, egg turning cycle, egg
turning time, and days of incubation
it is not suggested to adjust under normal circumstances.
- Under normal working conditions, press the " Setting" key (about 5 seconds) to
enter the temperature and humidity-related parameters, egg turning cycle, egg
turning time, and incubation days setting. The humidity display shows the code
"P1", and temperature display Flashing. Click on the "+" or "-" flashing value to
increase or decrease accordingly until you need the P1 high-temperature alarm
value parameter.
- After adjustment, press the " Setting " key to save the high-temperature alarm
parameter settings and automatically enter the "P2" heating upper limit Value
setting. The meaning and code of all parameters are shown in the following table:
Please use this function with caution,
- 6 -