Werbung
Operation
1. Switching on and off
The buds automatically turn on when you remove them from the charging case and turn off auto-
matically when you place them back into the charging case. After powering on, the headphones will
sync and connect automatically. If there is no Bluetooth connection, the headphones will turn off
automatically after a few minutes. You can also turn the buds on and off manually; for more details,
please refer to the „Touch Sensor" section.
2. Factory settings
To reset all settings to the factory default, tap the touch sensor on both buds quickly 5 times in a row.
The buds will then turn off and need to be placed in the charging case for a few seconds to activate.
3. Touch sensor / functions
You manage the buds' different functions using the respective touch sensor on the surface of the
buds. Depending on function, you will need to briefly tap or press and hold the left or right touch
sensor (multiple times) until you hear confirmation that the action has been carried out.
EN - Page 6 of 9
Werbung
