Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I. GENERAL SAFETY AND USE OF THE PRODUCT.
1. Please read the User Manual before using the product.
2. Place the product on a flat surface before use.
3. Before using, make sure that the product does not wave or tilt.
4. Do not use the product if product components are malfunctioning or damaged.
5. Do not stand or jump on the product.
6. Do not put fingers or other body parts into the operating area of the adjustment mechanism.
7. Do not expose the product to strong sunlight.
8. Do not use the product in extreme temperature and humidity conditions.
9. Use the product only for its intended purpose.
10. Do not make any modifications or repairs to the product.
11. Only after meeting the above recommendations there are no contraindications to use the
product.
12. Each serious incident related to the device should be reported to the manufacturer and the
Office for Registration of Medicinal Products, Medical Devices and Biocidal Products.
II. INTENDED USE OF THE PRODUCT.
The prophylactic-rehabilitation chair is intended for people with back injuries and with lumbar pain
syndromes. The task of the chair is to relieve the intervertebral discs and back muscles in a sitting position.
It also fulfills a preventive task in shaping the correct posture during long-term sitting work. Due to to the
multi-stage adjustment system, it allows you to assume a convenient position for people of various height.
People with other spine conditions or in case of any doubts are advised to consult a specialist doctor or
chiropractic.
III. CLEANING AND MAINTENANCE.
The metal frame should be cleaned with a damp cloth and mild cleaning agents. Upholstered elements should
be cleaned with generally available agents intended for cleaning upholstery. Do not use harsh chemicals.
IV. SAFETY CONDITIONS FOR THE ASSEMBLY.
1. Before use, make sure that all components are properly attached and tightened.
2. The chair should be folded by adults.
3. In caseof finding any defects, immediately contact the manufacturer and do not use the chair until the
defect is removed.
V. CONSTRUCTION AND TECHNICAL DATA.
Product components:
1. Frame – strong and durable made of carbon steel covered with a varnish coating.
2. Seat and knee support - made of 20 [mm] plywood and 75 [mm] polyurethane foam covered with a
pleasant-to-touch soft and breathable PU material.
3. Two-stage regulation system based on pneumatic rod Ø80 [mm]:
- for the knee section in the range of 0-30 [°];
- for the seat in the range of 0-24 [°].
4. Automatic backrest adjustment depending on the user's position.
5. Wheels with an additional PU layer and a locking system.
2
Werbung
