RF Solutions RIOT-RX-8R4 Kurzanleitung Seite 13

Configuring RIoT System to Wi-Fi
8. Select 'Create System & Finish'.
9. Click on "WiFi Setup".
10. Then, connect to device.
10. Enter your local Wi-Fi SSID &, Password.
11. Select "Location", then "Detect".
After you will see "Location Found".
Click on "OK".
You may also require:
"Daylight Saving".
14. Press 'Save & Exit'
RIoT Receiver will reboot, and connect directly to
your local Wi-Fi (allow upto 30seconds).
The WHITE LED provides status information.
Flashing 4x: Not Connected to the internet
Flashing 2x: In Setup Mode
ON: Connected to the internet
QS-RIOT-RX-WIFI-3
+
Page: 13
N et LED
(WHITE)