RF Solutions RIOT-RX-8R4 Kurzanleitung Seite 11

Configuring RIoT System to Wi-Fi
8. Once selected, then select 'RIoT System' in the top left
corner of your device which will return you to the RIoT
System app.
9. Select 'Create System & Finish'.
10. Select Wi-Fi setup.
11. Enter your local Wi-Fi SSID &, Password.
12. Select "Location"
Select "Detect". After you will see
"Location Found". Click on "OK".
You may also Click "Daylight Saving"
14. Press 'Save & Exit'
RIoT Receiver will reboot, and connect directly to your
local Wi-Fi (allow upto 30seconds).
The WHITE LED provides status
information.
Flashing 4x: Not Connected to
N et LED
(WHITE)
the internet
Flashing 2x: In Setup Mode
ON: Connected to the internet
QS-RIOT-RX-WIFI-3
+
Page: 11