Before Use - Solac Yuna Mini Gebrauchsanleitung

EN English (Original instructions)
KETTLE
YUNA MINI
DESCRIPTION
A Lid
B Lid opening button
C Handle
D On/Off switch
E Supply cord housing
F Main body
G Water level
H Base
I Filter
USE AND CARE
• Do not switch the appliance on without water.
• Do not use the appliance if the on/off switch does not
work.
• Do not move the appliance while in use.
• Use the handle(s) to lift or move the appliance.
• Respect the MAX and MIN levels.
• Disconnect the appliance from the mains when not in use
and before undertaking any cleaning task.
• Remove the appliance from its base to refill with water.
• Do not store the appliance if it is still hot.
• Only use water with the appliance.
• The appliance is only intended for heating water; as a
consequence, the appliance should not be used for the
cooking or heating of milk...
• The use of bottled mineral water adapted for human
consumption is recommended.
• Never leave the appliance unattended while in use.
• Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
• Take care when handling recipients containing liquids
heated in this appliance as they may boil fiercely.
• CAUTION: Water condensation may appear on the
surfaces and objects around this appliance.
INSTRUCTIONS FOR USE

BEFORE USE

• Remove the appliance's protective film.
• Please read carefully the "Safety advice and warnings"
booklet before first use
• Before using the product for the first time it is advisable to
boil water within, so as to remove all remaining dust and
impurities.
• Before using the product for the first time, clean the
parts that will come into contact with water in the manner
described in the cleaning section.
FILLING WITH WATER
• You must fill the water compartment before turning on the
appliance.
• Extract the appliance from its base.
• Open the lid by pressing the opening button.
• Fill the compartment taking care to observe the MAX and
MIN levels.
• Close the lid.
• Put the appliance back onto its base.
USE
• Extend the supply cord completely before plugging it in.
• Attach the appliance to its base making sure that it is
correctly fitted into place.
• Connect the appliance to the mains.
• Turn the appliance on, by using the on/off switch.
• Once the water has boiled the appliance will switch off
automatically.
• The appliance can be switched on again using the switch
once the control unit has cooled down; if it does not
switch on again, do not force it, allow it to cool down.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
• Put the supply cord back in the supply cord housing.
• Remove the water from the inside of the appliance.
• Allow to cool down.
• Clean the appliance.
SUPPLY CORD HOUSING
• This appliance has a supply cord housing situated on its
underside.
CARRY HANDLE(S)
• This appliance has a handle on the side of the body,
which facilitates comfortable transport.
SAFETY THERMAL PROTECTOR
• The appliance has a safety device, which protects the
appliance from overheating.