VEVOR TW-R36/72 Bedienungsanleitung Seite 2

HOW TO INSTALL IT
Step 1
Place brackets against the wall at desired locations. Mark screw holes and be sure
the marks of each bracket are at the same height level.
Step 2
Please drill a 3/16" hole at each pencil mark and then mount the brackets .
Step 3
Assemble the inner or outer rod parts and then shirr the drapery treatment onto the
Step 4
Screw rod finials on each rod end. Rotate the finial and rod parts for proper
alignment and visual balance if required.
Step 5
Extend the rod to the desired width. Lift the rod with drapery and drop it into brackets.
Adjust draperies to the desired position.
Step 6
Lock each rod part into position by tightening the screw by the tool until tight as
picture shows, which will prevent the rod from moving.
MAINTENANCE
1. Cleaning regularly .
2. Collision avoidance.
04
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
Technical Support and E-Warranty Certificate
www.vevor.com/support
Double Curtain Rods
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with
us if you are actually saving half in comparison with the top major brands.