–> This device is only intended for indoor
use. Do not use it in humid rooms or
near water.
–> Professionals may only carry out repairs.
–> Connect only to a properly grounded
electrical outlet.
ATTENTION
Danger of short circuit!
Risk of firedue to overload!
–> The device is to be used on
household power outlets with voltage,
power and frequency values
according to the specifications on the
label of the device.
–> Only for devices, which will not require
higher voltages as the device can deliver.
–> Do not connect after each other
–> Do not cover when in use
–> To disconnect the voltage pull the plug
–> If the warning light shines, the surge
protection is ready for use
-> Due to increased temperature load only
operate when uncoiled
Installation and operation
Please connect the multi socket with the
outlet socket of your house /apartement. If it
is planned to mount the multi socket e.g. on
a wallplease finish the assembling first.
Use the power on/off switch to get power to
the multi socket. The function – LED for sur-
ge protection will start shining which shows
the correct functionof the multi socket. The
multi socket is now ready for use.
Note: If the multifunction LED for over-
voltage protection is not lit, the over-
voltage protection is defective and should no
longer be used. In order to ensure protec-
tion, the overvoltage protection power strip
must be replaced with a new one.
Device Disposal
Do not dispose the device in the
usual dust bin! Hand it over to a
collection point for electric devices
of your municipality.
Packaging Disposal
Do not dispose the packaging in
the usual dust bin. Please dispose
it according to local disposal
prescriptions.
5